same subnet different vlans

From: Faryar Zabihi \(fzabihi\) (fzabihi@cisco.com)
Date: Mon Jan 16 2006 - 13:07:30 GMT-3

I have sw1 and r2 and r6 on the same Ethernet segment and same subnet
(130.1.1.0/24 vlan 35) Physically, both r2 and r6 plug into L2 ports on
sw1. r2 is in a vlan 35 port but r6 is in a vlan 6 port. I would think
that r6 needs to be plugged into a vlan 35 port on the switch or
otherwise they cant communicate. How can I get these three devices to
talk in this scenario? If all 3 devices are on the same subnet, how can
one be put in a different vlan and still have connectivity between them?

sw1 .7===130.1.1.0/24 vlan 35====.6 R6
                               |
                               |
                               |
                              .2

                             R2
sw1:
int fa0/3
    "to R6"
    switchport access vlan 6
int fa0/4
    "to R2"
    switchport access vlan 35
int vlan 35
  ip add 130.1.1.7 255.255.255.0

Thanks for your help,

 Faryar Zabihi
 Cisco Systems Inc.
   RTP, NC 27709

This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3