From: Bajo (bajoalex@gmail.com)
Date: Mon Jan 16 2006 - 06:10:05 GMT-3
Hi Anderson,
I posted the same question at the IE forum. Unfortunately no comment from
anyone. Hope one of the Brians will take a moment and tell me what I did
wrong?
http://forum.internetworkexpert.com/ubbthreads/showflat.php?Cat=3&Number=1040
8&page=0&view=collapsed&sb=5&o=&fpart=1
On 1/15/06, Anderson Mota Alves <mota_anderson@hotmail.com> wrote:
>
> Hi everyone, This weekend I started doing the IEWB labs and in my first
> lab Vol3 - Lab1 in Section 5.1 (Multicast configuration) I got the error
> in the fa0/0 on R5 below (it looks like there is no PIM neighborhood to
> be formed via fa0/0) *Jan 14 19:08:49.496: %MROUTE-3-NO_PIM_NBR: There is
> no PIM neighbor on this IDB: FastEthernet0/0 If you take a look at the
> diagram there is no PIM neighbor to be formed via this interface but the
> requirement says to enable pim on this interface, Does anybody know how
> to turn off this error message? It really bothered me while I was doing
> the lab on this router. R5#sh run int f0/0
> Building configuration...
>
> Current configuration : 154 bytes
> !
> interface FastEthernet0/0
> ip address 183.1.58.5 255.255.255.0
> ip pim sparse-dense-mode
> ip igmp join-group 226.26.26.26
> duplex auto
> speed auto
> Comments are really appreciated, Andy
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kind Regards,Bajo
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3