From: Anderson Mota Alves (mota_anderson@hotmail.com)
Date: Sun Jan 15 2006 - 09:52:51 GMT-3
Hi everyone, This weekend I started doing the IEWB labs and in my first
lab Vol3 - Lab1 in Section 5.1 (Multicast configuration) I got the error
in the fa0/0 on R5 below (it looks like there is no PIM neighborhood to
be formed via fa0/0) *Jan 14 19:08:49.496: %MROUTE-3-NO_PIM_NBR: There is
no PIM neighbor on this IDB: FastEthernet0/0 If you take a look at the
diagram there is no PIM neighbor to be formed via this interface but the
requirement says to enable pim on this interface, Does anybody know how
to turn off this error message? It really bothered me while I was doing
the lab on this router. R5#sh run int f0/0
Building configuration...
Current configuration : 154 bytes
!
interface FastEthernet0/0
ip address 183.1.58.5 255.255.255.0
ip pim sparse-dense-mode
ip igmp join-group 226.26.26.26
duplex auto
speed auto
Comments are really appreciated, Andy
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3