From: loke (loke14@gmail.com)
Date: Fri Jan 13 2006 - 23:23:51 GMT-3
What do you mean by "freezes up when loading". Sounds like most likely you
have a hardware issue. Either your flash or your Voice card.
Nick
On 1/13/06, JTheunissen <jtheunissen@dodo.com.au> wrote:
>
> I have a very specific issue with a 3620 router. The facts:
>
> * 3620 ROM 11.1(20) AA2 Early Deployment Release (fc1)
> * FLASH 16MB
> * DRAM 64MB
> * 1 Voice card two voice ports
> * 1 Fast Ethernet and Two Serial Ports
>
> I have ENT plus IOS 12.2-29 running on it fine however it won't run any
> other IOS I load. It freezes up when loading and will only boot when I
> remove the Voice card with any other IOS. If I leave out the Voice board
> the
> Ethernet port shows up but doesn't work. If I load back on the 12.2-29 IOS
> everything is fine, the other IOS Should run on the device according to
> the
> CISCO web site so I am at a loss to the actual problem. I was assuming it
> to
> be a limitation of the ROM.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3