From: Nadeem Zahid \(iszahid\) (iszahid@cisco.com)
Date: Fri Jan 13 2006 - 22:16:28 GMT-3
Let's assume this setup:
239.225.5.5 ----R1-----<frame>----R2---------Switch-------R1---
There is PIM SM running on the left of R2 and everything is happy. No
Mcast on the right of R2.
I wanna make the R1 interface able to receive traffic for the group
shown without
running MCast. I know I can use tunnels but I'm wondering if i use Mcast
helper
maps with the switch in the middle, how can I do that...
Switch ports are routed ports.
Nadeem
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3