From: Chris Atkins (chris_atkins@blueyonder.co.uk)
Date: Fri Jan 13 2006 - 19:12:25 GMT-3
Hi all
Still bit lost on this. Any sugestions most appreciated.
Cheers
Chris
----- Original Message -----
From: "Chris Atkins" <chris_atkins@blueyonder.co.uk>
To: "Chris Atkins" <chris_atkins@blueyonder.co.uk>
Sent: Wednesday, January 04, 2006 4:59 PM
Subject: Re: PIM Dense-Mode
> Any feedback would be appreciated,
>
> Many thanks
>
> Chris
> ----- Original Message -----
> From: "Chris Atkins" <chris_atkins@blueyonder.co.uk>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, January 03, 2006 12:02 PM
> Subject: PIM Dense-Mode
>
>
> > 3----------------1--------------2
> >
> > Hi All
> > With Pim dense mode what is the best way to get over the RPF issues on a
> > frame-relay multipoint set up. If R1 is the hub is it best to tunnel
> between
> > R3 and R2 to resolve the issue so R3 can Transmit to R2?
> >
> > Thanks in advance
> >
> > Chris.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3