From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Jan 09 2006 - 14:31:08 GMT-3
Prio,
The "snmp-server community" command is used to configure the
device to be polled by an NMS. The "snmp-server host" command defines
the IP address and community string of the NMS you want to trap to.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Prio Utomo
> Sent: Monday, January 09, 2006 8:10 AM
> To: ccielab@groupstudy.com
> Subject: RMON
>
> just confirming, should we configure
>
> snmp-server community cisco ro/rw,
>
> if we being asked to configure rmon to send traps in the event of
> particular
> event occured with community 'cisco', as my understanding that the
above
> command if the NMS want to pull/change particular snmp information
with
> community 'cisco', not used if the router want to send trap
>
>
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3