From: Michael Brooks (michaeljbrooks@gmail.com)
Date: Thu Nov 17 2005 - 21:06:53 GMT-3
Peter,
Awesome. I did not know that. I just tried it out and it works.
R1(config)#ip pim autorp listener
R1(config)#
Thanks!!!!!
On 11/17/05, Michael Brooks <michaeljbrooks@gmail.com> wrote:
>
> Yes, auto-rp only works with sparse-dense-mode.
>
> On 11/17/05, John Matus <John.Matus@tokiom.com> wrote:
> >
> > the task states: use the most reliable interface on R2 as the RP for all
> > multicast groups
> >
> > the solutions uses static rp's ( ip pim rp-address
150.1.2.2<http://150.1.2.2/>
> > )........
> > but could't you also use auto-rp for this as well. the previous task is
> > to use pim sparse mode. does auto rp only work w/ sparse-dense-mode? or
> > does it work w/ sparse mode as well? hmmm
> >
> >
> > Regards,
> >
> > John D. Matus
> > Technical Support / PAS
> > Fujitsu Consulting
> > 626-568-7716
> > John.Matus@tokiom.com
> >
=============================================================================
===========================
> >
> > This e-mail is intended solely for the individual to whom it is
> > addressed. The information contained in this transmission contains
> > confidential and/or proprietary information or is otherwise privileged.
> > If
> > the reader of this message is not the intended recipient, please be
> > advised
> > that any dissemination, distribution or copying of this transmission is
> > strictly prohibited. If you have received this e-mail in error, please
> > notify us immediately by returning it to the sender and deleting this
> > copy
> > from your system. Thank you for your cooperation.
> >
=============================================================================
===========================
> >
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3