Another fallback bridging question

From: steven richards (ccie_2005@hotmail.com)
Date: Mon Nov 14 2005 - 22:21:38 GMT-3

• Next message: Dong Lin: "OSPF does not redistribute statuc default rotue ?"
• Previous message: steven richards: "Different techniques with discarding Mac addresses with"
• Next in thread: Godswill Oletu: "Re: Another fallback bridging question"
• Maybe reply: Godswill Oletu: "Re: Another fallback bridging question"
• Maybe reply: Vincent Mashburn: "RE: Another fallback bridging question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

If you have an SVI interface lets say for vlan 5. And a couple switch ports
in vlan 5. If you apply the bridge group command to the SVI interface to
bridge the non routable traffic between vlan 5 and another vlan or routed
port will you also need to apply the bridge-group command on the switch
ports that are in vlan 5 as well ?

   Thanks,

• Next message: Dong Lin: "OSPF does not redistribute statuc default rotue ?"
• Previous message: steven richards: "Different techniques with discarding Mac addresses with"
• Next in thread: Godswill Oletu: "Re: Another fallback bridging question"
• Maybe reply: Godswill Oletu: "Re: Another fallback bridging question"
• Maybe reply: Vincent Mashburn: "RE: Another fallback bridging question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3