From: Matemane, Walter (walter.matemane@liberty.co.za)
Date: Sun Nov 13 2005 - 09:29:57 GMT-3
I have also experienced the same thing when running 2 or more server
mode in a domain. Some vlans (not all) will not be reached. Also reload
solve the problem, but will resurface after some days (this was on live
net).
Tlatlaru...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Montiean
Sent: 12 November 2005 06:09 PM
To: Saad Elias
Cc: ccielab@groupstudy.com
Subject: Re: Lab 2 task 1.1-1.4 VTP server and client mode
Lab4 task doesnot specific using server or client mode. So my personally
idea is that we can use either server mode on both site or one as a
client.
However, from my experience many time while I was working in lab
workbook, while using server mode on both sites. Sometime, after I
created vlan on one site but it wasn't propagate through trunk to
another site. So I had to clear vlan database or reload sw to fix the
problem. I am not sure someone will have the same experience. So most of
the time if it doesnot have wording for that.. I will use one as a
server and one as a client.
-Montiean
----- Original Message -----
From: "Saad Elias" <selias@uaeu.ac.ae>
To: "Montiean" <noktes@bellsouth.net>
Sent: Saturday, November 12, 2005 10:55 PM
Subject: Re: Lab 2 task 1.1-1.4 VTP server and client mode
> Sorry I meant Lab4 IEWB
>
> Montiean wrote:
>
>> Assume I understand your question and if you mean lab2 in IE, , The
>> question is really explicitly says sw2 should not be able to create
or
>> modify any vlan parameters but sw1 is able to. So what do you think
how
>> 's different between these two modes?
>>
>> -- Montiean
>>
>> ----- Original Message ----- From: "Saad Elias" <selias@uaeu.ac.ae>
>> To: <ccielab@groupstudy.com>
>> Sent: Saturday, November 12, 2005 9:47 PM
>> Subject: Lab 2 task 1.1-1.4 VTP server and client mode
>>
>>
>>> By deafult VTP mode is server.
>>> In Task 1.1-1.4 , both SW1 and SW2, can't we have more than two
server
>>> in VTP ?Why have not he configured one of these switches as server
mode
>>> (we do not need to configure), and SW2 client mode.?
>>>
>>>
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3