From: Loi, Choon Ho (ChoonHo.Loi@getronics.com)
Date: Sat Nov 12 2005 - 03:05:21 GMT-3
For this scenario:
R1(join 229.10.10.10)-----------(pim dense)R2(pim
dense)----------------(pim dense)R3
With the setup, R2 can't ping 229.10.10.10
What is the possible solution for this, if R1 can not enable ip
multicast-routing.
Following is the debug from R2:
Nov 12 05:01:24.330: IGMP(0): Received v2 Report on FastEthernet0/0 from
172.16.80.1 for 229.10.10.10
*Nov 12 05:01:24.330: IGMP(0): Received Group record for group
229.10.10.10, mode 2 from 172.16.80.1 for 0 sources
*Nov 12 05:01:24.330: IGMP(0): Updating EXCLUDE group timer for
229.10.10.10
*Nov 12 05:01:24.330: IGMP(0): MRT Add/Update FastEthernet0/0 for
(*,229.10.10.10) by 0
Sh ip mroute from R2:
(*, 229.10.10.10), 00:05:37/stopped, RP 0.0.0.0, flags: DC
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
FastEthernet0/0, Forward/Dense, 00:05:37/00:00:00
(172.16.80.2, 229.10.10.10), 00:04:58/00:01:03, flags: PT
Incoming interface: FastEthernet0/0, RPF nbr 0.0.0.0
Outgoing interface list: Null
(*, 224.0.1.40), 00:06:32/00:02:21, RP 0.0.0.0, flags: DCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
FastEthernet0/0, Forward/Dense, 00:06:32/00:00:00
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3