From: Todd.Osterberg@compucom.com
Date: Fri Nov 11 2005 - 20:32:46 GMT-3
I am having trouble bolting ipv6 on top of an existing ipv4 config. The config
is below:
multilink virtual-template 11
interface Serial4/0:1
no ip address
encapsulation ppp
ppp multilink
!
interface Serial4/1:1
no ip address
encapsulation ppp
ppp multilink
!
interface Virtual-Template11
ip address 132.1.45.5 255.255.255.248
ipv6 address 2001:CC1E:1:4545::5/65
ppp authentication chap
ppp chap hostname multi
ppp chap password 0 multi
ppp multilink
When I look at show ipv6 interface, the virtual access interface isn't
listed.
Virtual-Template11 is down, line protocol is down
IPv6 is enabled, link-local address is FE80::210:79FF:FE67:AC00
Global unicast address(es):
2001:CC1E:1:4545::5, subnet is 2001:CC1E:1:4545::/65 [TENTATIVE]
Joined group address(es):
FF02::1
FF02::1:FF00:5
FF02::1:FF67:AC00
MTU is 1500 bytes
ICMP error messages limited to one every 100 milliseconds
ICMP redirects are enabled
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
Loopback0 is up, line protocol is up
IPv6 is enabled, link-local address is FE80::210:79FF:FE67:AC00
Global unicast address(es):
2001:CC1E:1::5, subnet is 2001:CC1E:1::5/128
Joined group address(es):
FF02::1
FF02::1:FF00:5
FF02::1:FF67:AC00
MTU is 1514 bytes
ICMP error messages limited to one every 100 milliseconds
ICMP redirects are enabled
ND DAD is not supported
ND reachable time is 30000 milliseconds
Any ideas what I am missing?
TIA,
Todd
Todd Allen Osterberg
Senior Consultant, Professional Services US Western Region
CompuCom
eMail: todd.osterberg@compucom.com
T: (916) 577-1066
C: (916) 316-4650
www.CompuCom.com
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3