From: Niche (jackyliu419@gmail.com)
Date: Mon Nov 07 2005 - 23:42:23 GMT-3
Hi there,
To KY, would you mind to remove "vofr cisco", use "vofr data 4" and add
frame-relay voice-bandwidth xx(any number you want)and try it again?
To Chris,
It would be great if you can clarify =)
According to the document I have read, all configuration examples involve
"vofr cisco" command also involve a MC3810 in the transmission path. For 2
routers that are directly connected via a PVC, "vofr data xx" and
"frame-relay voice-bandwidth yy" are only need to be configured
(FRF.11Annex C fragmentation).
"vofr cisco" is the command that enable Cisco Proprietary Voice
Encapsulationfor Cisco MC3810.
Cheers~
Jacky
On 11/8/05, nhqky888@ybb.ne.jp <nhqky888@ybb.ne.jp> wrote:
>
> Chris,
>
> Yeah, I did on both end.
>
> I dont know why OSPF nei goes down
> once vofr is applied on its PVC.
>
>
>
> KY
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:05 GMT-3