From: nhqky888@ybb.ne.jp
Date: Tue Nov 08 2005 - 02:50:28 GMT-3
Niche,
I tried what you posted.
However it did not work.
Also not work, with vofr data 4 call-control 5.
It seems that OSPF/EIGRP/RIP donot work on VOFR.
R3:
interface Serial1/0
no ip address
encapsulation frame-relay
!
interface Serial1/0.1 point-to-point
ip address 5.5.34.3 255.255.255.0
frame-relay interface-dlci 304
vofr data 4
or
vofr data 4 call-control 5
R4:
interface Serial0/0
no ip address
encapsulation frame-relay
!
interface Serial0/0.1 point-to-point
ip address 5.5.34.4 255.255.255.0
frame-relay interface-dlci 403
vofr data 4
or
vofr data 4 call-control 5
On the follwing link, it says that vofr cisco can be confed on Cisco routers.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fvvfax_r/vrf_t.htm#wp1072284
To configure a Cisco router or MC3810 for a VoFR application
with an older release of the Cisco MC3810 (before Release 12.0(3)XG),
enter the following command:
vofr cisco
Thanks,
KY
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:05 GMT-3