From: Scott Morris (swm@emanon.com)
Date: Wed Nov 02 2005 - 01:14:12 GMT-3
You can always ask the proctor... But otherwise, if there are not
restrictions given (though they may pick something more specific on HOW one
way works versus the other), you'd be free to choose whichever way you felt
like.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Niche
Sent: Tuesday, November 01, 2005 10:19 PM
To: Scott Morris
Cc: Michael Brooks; ccielab@groupstudy.com
Subject: Re: Does PIM dense mode or sparse-dense mode work over frame relay?
Hi guys,
Talking about sparse-mode, something come up my mind..
If the question request you to only run sparse-mode on all multicast
interfaces, there are 2 options can be configured for auto-rp type multicast
setup.
1. BSR
2. Auto-RP with "ip pim autorp listener" on all non-RP multicast routers.
I am wondering whether Proctor will give me information for which way I
should do if I cannot figure out after I read the question statement.
By the way, thanks alot for Chris, Scott and Michael for the information.
Cheers~
Jacky
On 11/2/05, Scott Morris <swm@emanon.com> wrote:
>
> Ok, so they have pictures and I didn't. :)
>
> Thanks! I was looking for that before, but didn't find it in a timely
> fashion!
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of Michael Brooks
> Sent: Tuesday, November 01, 2005 9:52 PM
> To: ccielab@groupstudy.com
> Subject: Re: Does PIM dense mode or sparse-dense mode work over frame
> relay?
>
> This explains it also:
>
> http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/mcst_sol/frm
> _rlay
> .
> h
> tm#69070
>
> Regards,
> Mike
> On 11/1/05, Scott Morris <swm@emanon.com> wrote:
> >
> > Actually, it's a very good reference book all around. But you're
> > right, it's just for multicast. If you aren't ever going to run
> > multicast in real-life, you probably don't care! :)
> >
> > On the other hand, Amazon.com <http://Amazon.com>
> > <http://Amazon.com>
> offers it used as
> > well to save money!
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of dusth@comcast.net
> > Sent: Tuesday, November 01, 2005 9:37 PM
> > To: test; ccielab@groupstudy.com
> > Subject: Re: Does PIM dense mode or sparse-dense mode work over
> > frame relay?
> >
> > Sound like the millionaire talking here:). spent $50.00 just for one
> > question topic:) I'm not Mr. Bill Gate.
> >
> > -------------- Original message --------------
> >
> > > The Williamson multicast book around page 464 really provided that
> > > 'ah-ha' moment for me about the subject.
> > >
> > > Ben
> > >
> > > cciein2006@yahoo.com wrote:
> > >
> > > >Does PIM dense mode or sparse-dense mode work over frame relay? I
> > > >tried the ip
> > > pim nbma-mode command on a multipoint frame-relay interface but it
> > > generates an error message saying that PIM nbma-mode is not
> > > recommended for dense mode or sparse-dense mode?
> > > >
> > > >Why is this?
> > > >
> > > >_________________________________________________________________
> > > >__ __ __ Subscription information may be found at:
> > > >http://www.groupstudy.com/list/CCIELab.html
> > >
> > > __________________________________________________________________
> > > __ __ _ Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > ____________________________________________________________________
> > __ _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > ____________________________________________________________________
> > __ _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:04 GMT-3