From: Daniel Kutchin (daniel@kutchin.com)
Date: Wed Nov 02 2005 - 01:02:17 GMT-3
Switch register to 0x2101 and reload
BBr(boot)>#conf t
BBr(boot)(config)#config-register 0x2101
BBr(boot)(config)#^Z
BBr(boot)>#reload
--- Daniel----- Original Message ----- From: "Leonard Lu" <llu_ccie@yahoo.com> To: <ccielab@groupstudy.com> Sent: Wednesday, November 02, 2005 4:14 AM Subject: 2500 router held in boot mode
Hi, All,
I need help for a 2500 router held in boot mode. Here is the output of show version command. You can see there is no flash memory and DRAM has only 2MB memory size. What is wrong with this 2500 router? Anyway to repair it?
Thanks for the help.
--Leonard
BB1(boot)>en BB1(boot)#sh flash ^ % Invalid input detected at '^' marker. BB1(boot)# BB1(boot)#sh version Cisco Internetwork Operating System Software IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XA, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Thu 20-Feb-97 21:39 by loreilly Image text-base: 0x01010000, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c)XA, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
BB1 uptime is 5 minutes System restarted by power-on Running default software
cisco 2500 (68030) processor (revision D) with 1024K/1024K bytes of memory. Processor board ID 03270333, with hardware revision 00000000 X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 32K bytes of non-volatile configuration memory.
Configuration register is 0x2102 BB1(boot)#
--------------------------------- Yahoo! FareChase - Search multiple travel sites in one click.
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:04 GMT-3