From: kevin gannon (kevin@gannons.net)
Date: Thu Oct 27 2005 - 04:13:38 GMT-3
This is very useful for public hot spots it allows users with fixed IP addresses
from they home network to be natted. I see it working in hotels all
the time very
handy. Have a look at the below for more info:
http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00801dc742.html
Saves users having to configure DHCP on there machine meaning one less
reason why the hotspot wont work for them.
Regards
Kevin
On 10/27/05, Paresh Khatri <Paresh.Khatri@aapt.com.au> wrote:
> Hi,
>
> Does anyone know what the applicability for this feature is, enabled using the "ip nat allow-static-host" command. The docs state that it is used to support users configured with a static IP address. It does not say much beyond that ..
>
> Thanks,
> Paresh.
>
>
> This communication, including any attachments, is confidential. If
> you are not the intended recipient, you should not read it - please
> contact me immediately, destroy it, and do not copy or use any part of
> this communication or disclose anything about it.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3