NAT - Static IP Support feature

From: Paresh Khatri (Paresh.Khatri@aapt.com.au)
Date: Thu Oct 27 2005 - 02:05:26 GMT-3

• Next message: Scott Morris: "RE: Dialer map"
• Previous message: Bajo: "Re: Dialer map"
• Next in thread: kevin gannon: "Re: NAT - Static IP Support feature"
• Maybe reply: kevin gannon: "Re: NAT - Static IP Support feature"
• Maybe reply: Paresh Khatri: "RE: NAT - Static IP Support feature"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

Does anyone know what the applicability for this feature is, enabled using the "ip nat allow-static-host" command. The docs state that it is used to support users configured with a static IP address. It does not say much beyond that ..

Thanks,
Paresh.

This communication, including any attachments, is confidential. If
 you are not the intended recipient, you should not read it - please
 contact me immediately, destroy it, and do not copy or use any part of
 this communication or disclose anything about it.

• Next message: Scott Morris: "RE: Dialer map"
• Previous message: Bajo: "Re: Dialer map"
• Next in thread: kevin gannon: "Re: NAT - Static IP Support feature"
• Maybe reply: kevin gannon: "Re: NAT - Static IP Support feature"
• Maybe reply: Paresh Khatri: "RE: NAT - Static IP Support feature"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3