From: Venkataramanaiah.R (vramanaiah@gmail.com)
Date: Tue Oct 18 2005 - 14:58:15 GMT-3
I see when violate action is not used, the policer uses a single token
bucket and does not use the be value even if it is configured. I just
confirmed it through the show policy-map i/f output as given below.. So does
this mean that with CB-Policing, we loose the bursting capabilities (unlike
CAR) if violate action is not specified? My understanding after looking at
this output is that it can't burst.., but i want your views as well...
TIA
-Venkat
R5#sh policy-map
Policy Map bw
Class http
police cir 10000000 bc 50000 be 12500
conform-action transmit
exceed-action drop
R5-YY#sh policy-map interface
FastEthernet0/0
Service-policy output: bw
Class-map: http (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group 110
police:
cir 10000000 bps, bc 50000 bytes <====== "be" is not being used in-spite of
configuring it.
conformed 0 packets, 0 bytes; actions:
transmit
exceeded 0 packets, 0 bytes; actions:
drop
conformed 0 bps, exceed 0 bps
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3