From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Oct 18 2005 - 14:58:31 GMT-3
Yes it is enabled by default. Look at the "show atm map" output and you
will see that "broadcast" is included in the mappings. You can also
test this by pinging 255.255.255.255 and you should get a response from
all devices on the CLIP segment.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Venkataramanaiah.R
> Sent: Tuesday, October 18, 2005 1:45 AM
> To: ccielab@groupstudy.com
> Subject: Re: How to enable 'Broadcast' in Classical IP
>
> Hi Folks,
>
> I was wondering on this as well. My guess is broadcast will
> be enabled by default when we configure CLassical IP. I am unable to
> confirm this, because we do not have a ATM switch. Could someone who
> has good ATM setup confirm this behaviour please..?
>
> Thank you
> -Venkat
>
> On 10/16/05, manoj menon <manojmenon123@yahoo.com> wrote:
> > Group,
> >
> > How do we enable 'broadcast' while configuring CLASSILCAL IP -
> especially when the local router is an 'arp-server'
> >
> > regards,
> > Manoj
> >
> >
> >
> >
> > ---------------------------------
> > Yahoo! Music Unlimited - Access over 1 million songs. Try it free.
> >
> >
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3