From: kevin gannon (kevin@gannons.net)
Date: Fri Oct 07 2005 - 09:20:47 GMT-3
This might help "frame-relay intf-type dce".
Regards
Kevin
On 10/7/05, Shanky <shankyz@gmail.com> wrote:
> Hi group,
> I just tried to make the frame switch as DTE and the router as DCE, but it
> seems LMI is not workin as expected between them.
> The debug for LMI shows status enq being sent by the FR Switch to the
> router ?? How can that be ? the FR Switch is supposed to send status
> messages in response to the routers Status Enq.
> The configs are :
> FR Switch : Configured as DTE ( Frame-Relay intf-type dte)
>
>
> FRSW#sh run int s0/3/1
> Building configuration...
>
> Current configuration : 230 bytes
> !
> interface Serial0/3/1
> no ip address
> encapsulation frame-relay
> cdp enable
> frame-relay route 441 interface Serial0/0/0 414
> frame-relay route 442 interface Serial0/0/1 424
> frame-relay route 443 interface Serial0/3/0 434
> R4 : Configured as DCE with the clock rate command.
>
> R4#sh run int s0/0/0
> Building configuration...
>
> Current configuration : 167 bytes
> !
> interface Serial0/0/0
> ip address 192.1.1.4 <http://192.1.1.4> 255.255.255.0 <http://255.255.255.0>
> encapsulation frame-relay
> clock rate 128000
> cdp enable
> frame-relay map ip 192.1.1.1 <http://192.1.1.1> 441 broadcast
> R4#deb frame-relay lmi
> Frame Relay LMI debugging is on
> Displaying all Frame Relay LMI data
> R4#
> *Oct 7 11:33:19.895: Serial0/0/0(out): StEnq, myseq 3, yourseen 0, DTE down
> *Oct 7 11:33:19.895: datagramstart = 0x3F401B14, datagramsize = 13
> *Oct 7 11:33:19.895: FR encap = 0xFCF10309
> *Oct 7 11:33:19.895: 00 75 01 01 00 03 02 03 00
> *Oct 7 11:33:19.895:
> *Oct 7 11:33:19.899: RT IE 1, length 1, type 0
> *Oct 7 11:33:19.899: KA IE 3, length 2, yourseq 3 , myseq 0
> **Oct 7 11:33:19.899: Serial0/0/0(in): Unexpected StEnq*
> *Oct 7 11:33:29.895: Serial0/0/0(out): StEnq, myseq 4, yourseen 0, DTE down
> *Oct 7 11:33:29.895: datagramstart = 0x3F401254, datagramsize = 13
> *Oct 7 11:33:29.895: FR encap = 0xFCF10309
> *Oct 7 11:33:29.895: 00 75 01 01 00 03 02 04 00
> *Oct 7 11:33:29.895:
> *Oct 7 11:33:29.899: RT IE 1, length 1, type 0
> *Oct 7 11:33:29.899: KA IE 3, length 2, yourseq 4 , myseq 0
> *Oct 7 11:33:29.899: Serial0/0/0(in): Unexpected StEnq
> *Oct 7 11:33:39.895: Serial0/0/0(out): StEnq, myseq 5, yourseen 0, DTE down
> *Oct 7 11:33:39.895: datagramstart = 0x3F6B03D4, datagramsize = 13
> *Oct 7 11:33:39.895: FR encap = 0xFCF10309
> *Oct 7 11:33:39.895: 00 75 01 01 00 03 02 05 00
> *Oct 7 11:33:39.895:
> *Oct 7 11:33:39.899: RT IE 1, length 1, type 0
> *Oct 7 11:33:39.899: KA IE 3, length 2, yourseq 5 , myseq 0
> *Oct 7 11:33:39.899: Serial0/0/0(in): Unexpected StEnq
> *Oct 7 11:33:49.895: Serial0/0/0(out): StEnq, myseq 6, yourseen 0, DTE down
> *Oct 7 11:33:49.895: datagramstart = 0x3F6B0294, datagramsize = 13
> *Oct 7 11:33:49.895: FR encap = 0xFCF10309
> *Oct 7 11:33:49.895: 00 75 01 01 00 03 02 06 00
> *Oct 7 11:33:49.895:
> *Oct 7 11:33:49.899: RT IE 1, length 1, type 0
> *Oct 7 11:33:49.899: KA IE 3, length 2, yourseq 6 , myseq 0
> *Oct 7 11:33:49.899: Serial0/0/0(in): Unexpected StEnq
> *Oct 7 11:33:59.895: Serial0/0/0(out): StEnq, myseq 1, yourseen 0, DTE down
> *Oct 7 11:33:59.895: datagramstart = 0x3F401C54, datagramsize = 14
> *Oct 7 11:33:59.895: FR encap = 0x00010308
> *Oct 7 11:33:59.895: 00 75 95 01 01 00 03 02 01 00
> *Oct 7 11:33:59.895:
> *Oct 7 11:33:59.895: Serial0/0/0(out): StEnq, myseq 1, yourseen 0, DTE down
> *Oct 7 11:33:59.895: datagramstart = 0x3F6B1B94, datagramsize = 13
> *Oct 7 11:33:59.895: FR encap = 0x00010308
> *Oct 7 11:33:59.895: 00 75 51 01 00 53 02 01 00
> *Oct 7 11:33:59.895:
> *Oct 7 11:33:59.895: Serial0/0/0(out): StEnq, myseq 1, yourseen 0, DTE down
> *Oct 7 11:33:59.895: datagramstart = 0x3F6B1B94, datagramsize = 13
> *Oct 7 11:33:59.899: FR encap = 0xFCF10309
> *Oct 7 11:33:59.899: 00 75 01 01 00 03 02 01 00
> *Oct 7 11:33:59.899:
> *Oct 7 11:33:59.899: RT IE 1, length 1, type 0
> *Oct 7 11:33:59.899: KA IE 3, length 2, yourseq 1 , myseq 0
> *Oct 7 11:33:59.899: Serial0/0/0(in): Unexpected StEnq
> *Oct 7 11:33:59.903: RT IE 51, length 1, type 0
> *Oct 7 11:33:59.903: KA IE 53, length 2, yourseq 1 , myseq 0
> *Oct 7 11:33:59.903: Serial0/0/0(in): Unexpected StEnq
> *Oct 7 11:33:59.903: RT IE 1, length 1, type 0
> *Oct 7 11:33:59.903: KA IE 3, length 2, yourseq 1 , myseq 0
> *Oct 7 11:33:59.903: Serial0/0/0(in): Unexpected StEnq
> Any ideas ?
> Thanks
> Shanky
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3