From: Gustavo Novais (gustavo.novais@novabase.pt)
Date: Wed Sep 28 2005 - 08:06:57 GMT-3
Hello
No. This banner message that you refer is applied when you do a outbound
telnet from the router to a destined host
r3(config)#ip host teste 1.1.1.1
r3(config)#busy-message teste X
Enter TEXT message. End with the character 'X'.
You Wish! try Again!
X
r3(config)#^Z
r3#teste
*Mar 12 17:30:00.067: %SYS-5-CONFIG_I: Configured from console by
console
Translating "teste"
You Wish! try Again!
r3#
I am not aware of any other way of doing what Ling asked besides the one
he mentioned.
HTH
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Anthony Sequeira
Sent: quarta-feira, 28 de Setembro de 2005 6:50
To: Ling Yi
Cc: ccielab@groupstudy.com
Subject: Re: logging failure message banner
Could this be a reference to the Host Failed message you will find
documented here?
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
ffun_
c/ffcprt1/fcf004.htm#1001164
On 9/27/05, Ling Yi <lingyi10@gmail.com> wrote:
>
> hi all,
> I am trying to find a banner that does prompt an error message after
> user input either wrong password or login name.
> I know you can do it when running aaa by the following command:
> aaa new-model
> aaa authentication fail-message ^ use the correct password!^ just
> wondering if there are other ways to do this? like a normal banner ?
> thanks !
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:16 GMT-3