From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Sep 28 2005 - 17:06:47 GMT-3
You can use the "refuse-message" on the line to return an error
message if a line is full, but this isn't the same as an authentication
failed message. For the latter use AAA.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Gustavo Novais
> Sent: Wednesday, September 28, 2005 6:07 AM
> To: Anthony Sequeira; Ling Yi
> Cc: ccielab@groupstudy.com
> Subject: RE: logging failure message banner
>
> Hello
>
> No. This banner message that you refer is applied when you do a
outbound
> telnet from the router to a destined host
>
> r3(config)#ip host teste 1.1.1.1
> r3(config)#busy-message teste X
> Enter TEXT message. End with the character 'X'.
> You Wish! try Again!
> X
> r3(config)#^Z
> r3#teste
> *Mar 12 17:30:00.067: %SYS-5-CONFIG_I: Configured from console by
> console
> Translating "teste"
>
> You Wish! try Again!
>
> r3#
>
> I am not aware of any other way of doing what Ling asked besides the
one
> he mentioned.
> HTH
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Anthony Sequeira
> Sent: quarta-feira, 28 de Setembro de 2005 6:50
> To: Ling Yi
> Cc: ccielab@groupstudy.com
> Subject: Re: logging failure message banner
>
> Could this be a reference to the Host Failed message you will find
> documented here?
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
> ffun_
> c/ffcprt1/fcf004.htm#1001164
>
> On 9/27/05, Ling Yi <lingyi10@gmail.com> wrote:
> >
> > hi all,
> > I am trying to find a banner that does prompt an error message after
> > user input either wrong password or login name.
> > I know you can do it when running aaa by the following command:
> > aaa new-model
> > aaa authentication fail-message ^ use the correct password!^ just
> > wondering if there are other ways to do this? like a normal banner ?
> > thanks !
> >
> >
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:17 GMT-3