From: Bob Sinclair (bob@bobsinclair.net)
Date: Wed Aug 31 2005 - 15:53:34 GMT-3
Graham,
That is exactly what we do in our class, CheckiT and DOiT labs. Makes loading
result into various pods much more scalable!
Bob Sinclair
CCIE #10427, CCSI 30427, CISSP
www.netmasterclass.net
----- Original Message -----
From: Graham Hopkins
To: ccielab@groupstudy.com
Sent: Wednesday, August 31, 2005 2:46 PM
Subject: IPv6 over Frame Relay
Many of the workbooks and examples use the router generated link local
address
in frame relay maps
frame-relay map ipv6 FE80::204:C1FF:FE8E:19E0 103 broadcast
however I see some problems with this both in the real world and the lab.
This
config is router specific so if for exmaple a hub router changes you need
to
reconfigure all the spoke routers. Or the proctor loads your configs onto
another rack then your config will not work.
Would it not be better to hard code all frame-relay link local addresses to
prevent this.
ipv6 address FE80::2 link-local
comments please
Graham Hopkins
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3