From: Graham Hopkins (ghopkins@wolf-rock.co.uk)
Date: Wed Aug 31 2005 - 15:46:58 GMT-3
Many of the workbooks and examples use the router generated link local address
in frame relay maps
frame-relay map ipv6 FE80::204:C1FF:FE8E:19E0 103 broadcast
however I see some problems with this both in the real world and the lab. This
config is router specific so if for exmaple a hub router changes you need to
reconfigure all the spoke routers. Or the proctor loads your configs onto
another rack then your config will not work.
Would it not be better to hard code all frame-relay link local addresses to
prevent this.
ipv6 address FE80::2 link-local
comments please
Graham Hopkins
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3