From: Scott Morris (swm@emanon.com)
Date: Wed Aug 31 2005 - 16:26:31 GMT-3
I do agree with you. I think doing things like this would make life much
simpler.
I'm sure people will learn exciting things like this when they go to really
implement this beast in real live networks! ;)
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Graham Hopkins
Sent: Wednesday, August 31, 2005 2:47 PM
To: ccielab@groupstudy.com
Subject: IPv6 over Frame Relay
Many of the workbooks and examples use the router generated link local
address in frame relay maps
frame-relay map ipv6 FE80::204:C1FF:FE8E:19E0 103 broadcast
however I see some problems with this both in the real world and the lab.
This config is router specific so if for exmaple a hub router changes you
need to reconfigure all the spoke routers. Or the proctor loads your configs
onto another rack then your config will not work.
Would it not be better to hard code all frame-relay link local addresses to
prevent this.
ipv6 address FE80::2 link-local
comments please
Graham Hopkins
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3