From: Scott Smith (hioctane@gmail.com)
Date: Sat Aug 13 2005 - 13:24:48 GMT-3
Only place this command "ppp multilink links minimum 2" on one router.
I believe you also need "ppp multilink" on the bri interface.
-- Scott Smith CCNP, CDE, MCNE, MCSEOn 8/13/05, Stefan Grey <examplebrain@hotmail.com> wrote: > What is this problem and why can't the second channel be up in the ppp > multilink > Previously I used the same config and it worked. Don't know why it doesn't > now. > Thanks for help. > > The debugging shows: > > R5#ping 191.1.45.4 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 191.1.45.4, timeout is 2 seconds: > > *Mar 1 00:54:41.030: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to > up > *Mar 1 00:54:41.034: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di0 > *Mar 1 00:54:41.058: BR0/0:1 MLP: Request add link to bundle > *Mar 1 00:54:41.058: BR0/0:1 MLP: Adding link to bundle > *Mar 1 00:54:41.062: Di0 MLP: Lost frag timeout too low for slippage > constraints, increasing to 1524 ms > *Mar 1 00:54:41.062: Di0 MLP: Added first link BR0/0:1 to bundle R4 > *Mar 1 00:54:42.060: %LINEPROTO-5-UPDOWN: Line protocol on Interface > BRI0/0:1, changed state to up.!!!! > Success rate is 80 percent (4/5), round-trip min/avg/max = 32/32/32 ms > R5# > *Mar 1 00:54:43.266: Di0: MLP: Bundle has 1/2 desired links, requesting > another > R5# > *Mar 1 00:54:44.568: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected > to 8358661 R4 > R5# > > > and later: > R5# > *Mar 1 00:55:13.315: Di0: MLP: Bundle has 1/2 desired links, requesting > another > > > R4 router : > > *Mar 1 00:55:17.578: Di0: MLP: Bundle has 1/2 desired links, requesting > another > *Mar 1 00:55:17.578: BR0/0 DDR: has 2 ongoing call(s), maximum allowed > call(s) 2 on pool 1, exceeded max > > R4#show run int dialer 0 > Building configuration... > > Current configuration : 181 bytes > ! > interface Dialer0 > ip address 191.1.45.4 255.255.255.0 > encapsulation ppp > dialer pool 1 > dialer string 8358662 > dialer-group 1 > ppp multilink > ppp multilink links minimum 2 > end > > > R5#show run int dialer 0 > Building configuration... > > Current configuration : 181 bytes > ! > interface Dialer0 > ip address 191.1.45.5 255.255.255.0 > encapsulation ppp > dialer pool 1 > dialer string 8358661 > dialer-group 1 > ppp multilink > ppp multilink links minimum 2 > end > > R4#show run int bri0/0 > Building configuration... > > Current configuration : 153 bytes > ! > interface BRI0/0 > no ip address > encapsulation ppp > dialer pool-member 1 > isdn switch-type basic-ni > isdn spid1 0835866101 > isdn spid2 0835866301 > end > > R5#show run int bri0/0 > Building configuration... > > Current configuration : 153 bytes > ! > interface BRI0/0 > no ip address > encapsulation ppp > dialer pool-member 1 > isdn switch-type basic-ni > isdn spid1 0835866201 > isdn spid2 0835866401 > end > > _________________________________________________________________ > The secret is out - quality Irish singles meet at Match.com! > http://match.msn.ie/match/mt.cfm?pg=channel&tcid=237596 > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3