From: Stefan Grey (examplebrain@hotmail.com)
Date: Sat Aug 13 2005 - 13:40:59 GMT-3
I tried everything,
including command minimum 2 only on one side (but probably that is not a
problem).
Also duplicated all commands on bri interfaces, but this doesn't help as
well.
the same configuration worked for me yesterday but don't know why the don't
know and don't know how to interpret the error messages from the debug ppp
multilink command.
>From: Scott Smith <hioctane@gmail.com>
>Reply-To: Scott Smith <hioctane@gmail.com>
>To: Stefan Grey <examplebrain@hotmail.com>
>CC: ccielab@groupstudy.com
>Subject: Re: problem with ppp multilink
>Date: Sat, 13 Aug 2005 11:24:48 -0500
>
>Only place this command "ppp multilink links minimum 2" on one router.
>I believe you also need "ppp multilink" on the bri interface.
>
>--
>Scott Smith
>CCNP, CDE, MCNE, MCSE
>
>
>On 8/13/05, Stefan Grey <examplebrain@hotmail.com> wrote:
> > What is this problem and why can't the second channel be up in the ppp
> > multilink
> > Previously I used the same config and it worked. Don't know why it
>doesn't
> > now.
> > Thanks for help.
> >
> > The debugging shows:
> >
> > R5#ping 191.1.45.4
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 191.1.45.4, timeout is 2 seconds:
> >
> > *Mar 1 00:54:41.030: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state
>to
> > up
> > *Mar 1 00:54:41.034: %DIALER-6-BIND: Interface BR0/0:1 bound to profile
>Di0
> > *Mar 1 00:54:41.058: BR0/0:1 MLP: Request add link to bundle
> > *Mar 1 00:54:41.058: BR0/0:1 MLP: Adding link to bundle
> > *Mar 1 00:54:41.062: Di0 MLP: Lost frag timeout too low for slippage
> > constraints, increasing to 1524 ms
> > *Mar 1 00:54:41.062: Di0 MLP: Added first link BR0/0:1 to bundle R4
> > *Mar 1 00:54:42.060: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> > BRI0/0:1, changed state to up.!!!!
> > Success rate is 80 percent (4/5), round-trip min/avg/max = 32/32/32 ms
> > R5#
> > *Mar 1 00:54:43.266: Di0: MLP: Bundle has 1/2 desired links, requesting
> > another
> > R5#
> > *Mar 1 00:54:44.568: %ISDN-6-CONNECT: Interface BRI0/0:1 is now
>connected
> > to 8358661 R4
> > R5#
> >
> >
> > and later:
> > R5#
> > *Mar 1 00:55:13.315: Di0: MLP: Bundle has 1/2 desired links, requesting
> > another
> >
> >
> > R4 router :
> >
> > *Mar 1 00:55:17.578: Di0: MLP: Bundle has 1/2 desired links, requesting
> > another
> > *Mar 1 00:55:17.578: BR0/0 DDR: has 2 ongoing call(s), maximum allowed
> > call(s) 2 on pool 1, exceeded max
> >
> > R4#show run int dialer 0
> > Building configuration...
> >
> > Current configuration : 181 bytes
> > !
> > interface Dialer0
> > ip address 191.1.45.4 255.255.255.0
> > encapsulation ppp
> > dialer pool 1
> > dialer string 8358662
> > dialer-group 1
> > ppp multilink
> > ppp multilink links minimum 2
> > end
> >
> >
> > R5#show run int dialer 0
> > Building configuration...
> >
> > Current configuration : 181 bytes
> > !
> > interface Dialer0
> > ip address 191.1.45.5 255.255.255.0
> > encapsulation ppp
> > dialer pool 1
> > dialer string 8358661
> > dialer-group 1
> > ppp multilink
> > ppp multilink links minimum 2
> > end
> >
> > R4#show run int bri0/0
> > Building configuration...
> >
> > Current configuration : 153 bytes
> > !
> > interface BRI0/0
> > no ip address
> > encapsulation ppp
> > dialer pool-member 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866101
> > isdn spid2 0835866301
> > end
> >
> > R5#show run int bri0/0
> > Building configuration...
> >
> > Current configuration : 153 bytes
> > !
> > interface BRI0/0
> > no ip address
> > encapsulation ppp
> > dialer pool-member 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866201
> > isdn spid2 0835866401
> > end
> >
> > _________________________________________________________________
> > The secret is out - quality Irish singles meet at Match.com!
> > http://match.msn.ie/match/mt.cfm?pg=channel&tcid=237596
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3