From: Teesa Peter (tespet@rediffmail.com)
Date: Fri Jul 08 2005 - 02:56:10 GMT-3
Hi group,
I just thought of this situation but didn't find any
solution.
R1--------------R2-------------R3
R1---R2 subnet is
10.1.12.8 255.255.255.252
R2---R3 subnet is 10.1.13.0 255.255.255.252
R1's loopback 0 is 10.1.12.1 255.255.255.255
R1's loopback 1 is
10.1.12.5 255.255.255.252
R1--R2 link and R1's loopbacks area on Area 1.
R2--R3 link is Area 0
I want to summarise Area 1 subnets into area 0 to a
single route, along with specific route of R1's loopback 1 .ie only 10.1.12.8
& 10.1.12.1 should be summarised.Is it possible ?
If I configure area
1 range command then all the three subnets will be summarised ,How can I
exclude loopback 1 being summarised ?
If I configure area filter-list
then how can I generate the summary route ?
Or if there is any other way
of accomplishing this ?
Thanks,
Peter
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3