From: Zouta oxpf (zouta.oxpf@gmail.com)
Date: Fri Jul 08 2005 - 08:32:28 GMT-3
Redistribute Loopback1. Advertise Loopback0 with network statement,
and use area 1 range.
HTH
ZO
On 8 Jul 2005 05:56:10 -0000, Teesa Peter <tespet@rediffmail.com> wrote:
>
> Hi group,
>
> I just thought of this situation but didn't find any
> solution.
>
> R1--------------R2-------------R3
>
> R1---R2 subnet is
> 10.1.12.8 255.255.255.252
> R2---R3 subnet is 10.1.13.0 255.255.255.252
> R1's loopback 0 is 10.1.12.1 255.255.255.255
> R1's loopback 1 is
> 10.1.12.5 255.255.255.252
>
> R1--R2 link and R1's loopbacks area on Area 1.
> R2--R3 link is Area 0
>
> I want to summarise Area 1 subnets into area 0 to a
> single route, along with specific route of R1's loopback 1 .ie only 10.1.12.8
> & 10.1.12.1 should be summarised.Is it possible ?
>
> If I configure area
> 1 range command then all the three subnets will be summarised ,How can I
> exclude loopback 1 being summarised ?
>
> If I configure area filter-list
> then how can I generate the summary route ?
>
> Or if there is any other way
> of accomplishing this ?
>
>
> Thanks,
> Peter
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3