From: ccie2be (ccie2be@nyc.rr.com)
Date: Wed Jun 08 2005 - 18:29:10 GMT-3
NOPE, not allowed.
With Eigrp, all External routes must be the same. You can't change the AD of
EXT eigrp routes on a per-route basis.
You can change the AD of all eigrp EXTERNAL routes but you have to use the
other form of the distance command.
And, you can also change the AD of internal eigrp routes on a per-route
basis using the form of the distance you used below.
HTH, Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of B
Kim
Sent: Wednesday, June 08, 2005 5:02 PM
To: CCIE Study Group
Subject: The distance command on EIGRP
Hi
The distance <AD> <source_ip> <wildcard_mask> <acl#> doesn't seem to
work with EIGRP.
For example, I want to decrease the AD for the external route
172.16.110.0/24 to 100 under EIGRP
!
router eigrp 100
distance 100 0.0.0.0 255.255.255.255 1
!
!
access-list 1 permit 172.16.110.0 0.0.0.255
!
But the routing table still shows its AD is 170.
D EX 172.16.110.0/24 [170/512256] via 172.16.60.10, 00:17:43, Vlan60
What's wrong with this? Am I missing anything?
Thanks in advance
Beomsu Kim
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3