2 different ATM VPI/VCI

From: James Gwede (ccie@webmail.co.za)
Date: Fri Jun 03 2005 - 11:52:28 GMT-3

Next message: gladston@br.ibm.com: "Dialer Watch and Dialer-group"
Previous message: Sumit: "Re: OSPF Authentication"
Next in thread: istong@stong.org: "Re: 2 different ATM VPI/VCI"
Maybe reply: istong@stong.org: "Re: 2 different ATM VPI/VCI"
Maybe reply: Joe Rinehart: "Re: 2 different ATM VPI/VCI"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all, is it possible to have two ATM PVCs on the same IP
subnet? eg., R1 pvc 0/100 (10.10.10.1/30)and R2 pvc 1/101
(10.10.10.2/30). Will this work? I've tried to no avail
unless I configure the same VPI/VCI pairs on both ends of
the PVC. You help will be appreciated.

Next message: gladston@br.ibm.com: "Dialer Watch and Dialer-group"
Previous message: Sumit: "Re: OSPF Authentication"
Next in thread: istong@stong.org: "Re: 2 different ATM VPI/VCI"
Maybe reply: istong@stong.org: "Re: 2 different ATM VPI/VCI"
Maybe reply: Joe Rinehart: "Re: 2 different ATM VPI/VCI"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:40 GMT-3