From: ccie2be (ccie2be@nyc.rr.com)
Date: Wed Jun 01 2005 - 19:35:06 GMT-3
What's the physical link over which BGP is trying to peer?
It does make a difference.
Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Matus
Sent: Wednesday, June 01, 2005 6:03 PM
To: ccielab@groupstudy.com
Subject: ipv6 for bgp
just wondering if my observations were correct..........
if you have a peer that runs both ipv4 and ipv6 and you do the following:
router bgp 100
neighbor 1.1.1.1 remote 100
address-family ipv6
neighbor 1.1.1.1 activate
the result is that both ipv4 and ipv6 adjacencies come up.
i checked the running config after and found the ipv6 address mapping in the
config, but when i do a "show bgp ipv6 neighbor" it does not show the ipv6
address of the remote host, hence my question............
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:40 GMT-3