From: John Matus (john_matus@hotmail.com)
Date: Wed Jun 01 2005 - 19:02:51 GMT-3
just wondering if my observations were correct..........
if you have a peer that runs both ipv4 and ipv6 and you do the following:
router bgp 100
neighbor 1.1.1.1 remote 100
address-family ipv6
neighbor 1.1.1.1 activate
the result is that both ipv4 and ipv6 adjacencies come up.
i checked the running config after and found the ipv6 address mapping in the
config, but when i do a "show bgp ipv6 neighbor" it does not show the ipv6
address of the remote host, hence my question............
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:40 GMT-3