Re: DB9 to RJ45 on a MARC router card (Mobile Access Router)

From: Ian Henderson (ianh@chime.net.au)
Date: Mon May 30 2005 - 00:51:36 GMT-3

• Next message: Firebat: "CCIE SP Mailing list"
• Previous message: san: "ATM ilmi-pvc-discover subinterface"
• Maybe in reply to: Matthew Seppeler: "DB9 to RJ45 on a MARC router card (Mobile Access Router)"
• Next in thread: Matthew Seppeler: "RE: DB9 to RJ45 on a MARC router card (Mobile Access Router)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

On Sun, 29 May 2005, Matthew Seppeler wrote:

> I tried using a DB9 gender bender that would let me connect a DB9 female
> connector to the MAR and take an RJ45 roll over cable to the terminal
> server. No such luck. I think their is a pinout issue here that I'm
> not quite sure how to figure out. Any help would be appreciated!

Have you tried using a straight through cable in this scenario? I don't
know about the MAR specifically, but this has worked for me with unusual
gear in the past.

Rgds,

- I.

--
Ian Henderson CCNA, CCNP
Senior Network Engineer
iiNet Limited
Chime Communications Pty Ltd

• Next message: Firebat: "CCIE SP Mailing list"
• Previous message: san: "ATM ilmi-pvc-discover subinterface"
• Maybe in reply to: Matthew Seppeler: "DB9 to RJ45 on a MARC router card (Mobile Access Router)"
• Next in thread: Matthew Seppeler: "RE: DB9 to RJ45 on a MARC router card (Mobile Access Router)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:03 GMT-3