From: Matthew Seppeler (Matt.Seppeler@InetX.com)
Date: Mon May 30 2005 - 11:36:40 GMT-3
I tried a straight and cross over cable with no luck.
-----Original Message-----
From: Ian Henderson [mailto:ianh@chime.net.au]
Sent: Sun 5/29/2005 10:51 PM
To: Matthew Seppeler
Cc: ccielab@groupstudy.com
Subject: Re: DB9 to RJ45 on a MARC router card (Mobile Access Router)
On Sun, 29 May 2005, Matthew Seppeler wrote:
> I tried using a DB9 gender bender that would let me connect a DB9 female
> connector to the MAR and take an RJ45 roll over cable to the terminal
> server. No such luck. I think their is a pinout issue here that I'm
> not quite sure how to figure out. Any help would be appreciated!
Have you tried using a straight through cable in this scenario? I don't
know about the MAR specifically, but this has worked for me with unusual
gear in the past.
Rgds,
- I.
--
Ian Henderson CCNA, CCNP
Senior Network Engineer
iiNet Limited
Chime Communications Pty Ltd
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:03 GMT-3