From: Bajo (bajoalex@gmail.com)
Date: Thu May 26 2005 - 19:51:50 GMT-3
Hi GS,
Am having an issue with an ISDN calls staying up forever even though I
have the idle-timeout and the ospf-demand-circuit (to stop OSPF hellos
from ageing).
Thanks for the help in advance.
My config on R4 and R5 is similar (diff only in spid and DN )
dialer-list 1 protocol ip permit
R5#sh run | be BRI
interface BRI2/0
ip address 183.1.45.5 255.255.255.248
encapsulation ppp
ip ospf demand-circuit
dialer idle-timeout 180 either
dialer map ip 183.1.45.4 name R4 broadcast 8358661
dialer map ip 183.1.45.4 name R4 broadcast 8358663
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866201 8358662
isdn spid2 0835866401 8358664
no cdp enable
ppp authentication pap
ppp pap sent-username R5 password 0 CISCO
ppp multilink
ppp multilink links minimum 2
!
!
R5#sh isdn acti
--------------------------------------------------------------------------------
ISDN ACTIVE CALLS
--------------------------------------------------------------------------------
Call Calling Called Remote Seconds Seconds Seconds Charges
Type Number Number Name Used Left Idle Units/Currency
--------------------------------------------------------------------------------
Out ---N/A--- 8358661 R4 1591 Unavail - 0
In 8358663 8358662 R4 1589 Unavail -
--------------------------------------------------------------------------------
R4>sh ver
Cisco IOS Software, 3600 Software (C3640-I-M), Version 12.3(11)T3,
RELEASE SOFTWARE (fc4)
-- Kind Regards,Bajo
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:02 GMT-3