From: Long Kwok (lkwok@ccieunix.com)
Date: Sun May 15 2005 - 16:14:20 GMT-3
Sure Sean here is config as it sits now
TIA , Long
Rack1R4#show run int bri0/0
Building configuration...
Current configuration : 417 bytes
!
interface BRI0/0
ip address 132.1.45.4 255.255.255.248
ip router isis
encapsulation ppp
dialer idle-timeout 0
dialer map clns 49.0035.0001.0001.0005.00 name ROUTER5 class CALL
broadcast 5272015
dialer map ip 132.1.45.5 name ROUTER5 class CALL 5272015
isdn switch-type basic-ni
isdn spid1 5272014
ppp callback accept
ppp authentication chap
ppp chap hostname ROUTER4
isis circuit-type level-2-only
end
Rack1R4#
Rack1R4#
Rack1R5#show run int bri0/0
Building configuration...
Current configuration : 332 bytes
!
interface BRI0/0
ip address 132.1.45.5 255.255.255.248
ip router isis
encapsulation ppp
dialer map clns 49.0044.0001.0001.0004.00 name ROUTER4 broadcast
5272014
dialer map ip 132.1.45.4 name ROUTER4 5272014
dialer-group 1
isdn switch-type basic-ni
isdn spid1 5272015
ppp callback request
ppp chap hostname ROUTER5
end
Rack1R5#
Dialer-list 1 protocol clns_is permit
-----Original Message-----
From: Sean C [mailto:Upp_and_Upp@hotmail.com]
Sent: Sunday, May 15, 2005 12:03 PM
To: ccielab@groupstudy.com
Subject: Re: ISIS Adjacency formation over ISDN IE lab 2
Hi Long,
You mention that ISIS is configured properly both globally and at the
BRI
int level. Does this include defining clns in a dialer map? That one
always used to get me until I beat it in my brain. If you're having
trouble, can you post your configs?
Sean
----- Original Message -----
From: "Long Kwok" <lkwok@ccieunix.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, May 15, 2005 2:32 PM
Subject: ISIS Adjacency formation over ISDN IE lab 2
> Hi, in IE lab 2 there is a DDR problem discussing clns_is for the
only
> protocol to bring up the isdn circuit from R5's side , so when this
> isdn circuit is up , would you expect to be able to issue a "show clns
> neigh" command and see a isis adjacency , assuming that all isis is
> configured properly both globally and at the bri interface level ? As
> when isdn is up I do not see an isis adjacency forming ??
>
>
>
> TIA , Long
>
>
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3