From: Long Kwok (lkwok@ccieunix.com)
Date: Sun May 15 2005 - 15:32:14 GMT-3
Hi, in IE lab 2 there is a DDR problem discussing clns_is for the only
protocol to bring up the isdn circuit from R5's side , so when this
isdn circuit is up , would you expect to be able to issue a "show clns
neigh" command and see a isis adjacency , assuming that all isis is
configured properly both globally and at the bri interface level ? As
when isdn is up I do not see an isis adjacency forming ??
TIA , Long
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3