NMC#2

From: Dennis J. Hartmann (dennisjhartmann@hotmail.com)
Date: Wed Apr 20 2005 - 15:13:01 GMT-3

• Next message: Anthony Sequeira: "Re: Switchport nonegotiate / DTP"
• Previous message: PhiL: "OT: UPLINKFAST versus BACKBONEFAST"
• Next in thread: Lee Donald: "RE: NMC#2"
• Maybe reply: Lee Donald: "RE: NMC#2"
• Maybe reply: James Matrisciano: "RE: NMC#2"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

    I'm having a hard time seeing the Cat1 to Cat2 connection in the NMC
scenario's diagram. Is this indicative of the CCIE lab in general (that
there may be a lab diagram with some connectivity that's not shown in the
diagram)?
 
    Also: In the NMC#2 scenario, there's a port-channel interface that maps
to the channel-group instances on Fa 0/13 and 0/14. In this scenario, both
the physical interfaces and the L2 port-channel interface has the following
commands:
 
sw tr enc dot1q
sw tr allowed vlan 10,20,30,40,50
sw mode trunk
 
    I would check it myself, but I don't have connectivity to equipment
today. My question is as follows:
 
    Is this port-channel to physical interface configuration mapping done
dynamically by the switch or must it be manually configured?
 
    Thanks.
 

Sincerely,

Dennis J. Hartmann

White Pine Communications

dh8@pobox.com

CCSI#23402/CCIP/CCNP/CCDP/CCNA/CCDA

Cisco IP Voice Support & Design Specialist

Cisco Optical, VPN & IDS Specialist

MCSE

• Next message: Anthony Sequeira: "Re: Switchport nonegotiate / DTP"
• Previous message: PhiL: "OT: UPLINKFAST versus BACKBONEFAST"
• Next in thread: Lee Donald: "RE: NMC#2"
• Maybe reply: Lee Donald: "RE: NMC#2"
• Maybe reply: James Matrisciano: "RE: NMC#2"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:04 GMT-3