From: mani poopal (mani_ccie@yahoo.com)
Date: Wed Apr 20 2005 - 07:24:15 GMT-3
Guys please look at the scenario below any help is appreciated.
Frame relay hub and spoke: RB hub and RA/RC spokes
e0(RA)s0--------------------s0(RB)HUB-----------s0(RC)e0 spoke
s0 =133.13.13.1 s0 133.13.13.2 s0=133.13.13.3
e0 =133.13.10.1 e0 133.13.20.1 e0=133.13.30.1
lo0 =133.13.1.1 lo0 133.13.2.2 lo0=133.13.3.3
scenario:
make RB mapping agent
make RA e0 Join mcast group 225.25.25.25
make RA announce it as RP.for multicast group 225.25.25.25
questions:
-If not asked to enable mcast on lo 0, is it ok to put lo 0 in pim and announce RA lo 0(ip pim send-rp-announce lo 0) or should we announce e0
-once this is configured, unable to ping the mcast 225.25.25.25 group from FR other spoke router(RC), so how we solve, even if a question doesnt asks for static mcast routes and introduction of tunnel interfaces, can we use it, how
thanks
Mani
B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
(416)431 9929
MANI_CCIE@YAHOO.COM
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:02 GMT-3