Policy Based Routing

From: Loi, Choon Ho (ChoonHo.Loi@getronics.com)
Date: Mon Apr 11 2005 - 12:34:24 GMT-3

Next message: mani poopal: "Re: CAR- rate-limiit command"
Previous message: ccie2be: "RE: PRIV."
Next in thread: gladston@br.ibm.com: "Re: Policy Based Routing"
Maybe reply: gladston@br.ibm.com: "Re: Policy Based Routing"
Maybe reply: Jelle Borsje: "Re: Policy Based Routing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

          ISP1 ISP2
           | |
        ------- -------
        | R1 | | R2 |
        ------- -------
   192.16.20.2/24 |192.16.20.3/24
           | |
           | |
        -------------------
        | Sw1 |
        -------------------
                   |
                   |192.16.20.251/24
        -------------------
        | Fw |
        -------------------
                   |172.16.20.251/24
                   |172.16.20.1/24
        -------------------
        | Sw2 (L3 Sw) |
        -------------------
                   |
           Internal User (172.16.20.0/24)

R1 being Active router and all traffic goes theu R1 at this moment. R2
will only kicks in if R1 Fail.

Base on the above setup, can I do policy routing in Sw2 so that a
specific destination ip (i.e: 131.64.1.1) will be route to R2 and goes
out thru ISP2?

Thanks

Next message: mani poopal: "Re: CAR- rate-limiit command"
Previous message: ccie2be: "RE: PRIV."
Next in thread: gladston@br.ibm.com: "Re: Policy Based Routing"
Maybe reply: gladston@br.ibm.com: "Re: Policy Based Routing"
Maybe reply: Jelle Borsje: "Re: Policy Based Routing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:56 GMT-3