From: Dillon Yang (gzdillon@hotmail.com)
Date: Tue Mar 01 2005 - 14:00:10 GMT-3
Is there an approach to ISIS P2P topology in FR main interface? Or ISIS broadcast topology in FR P2P subinterface?
Just simulation of OSPF.
Thanks in advance.
----- Original Message -----
From: "Bajo" <bajoalex@gmail.com>
To: "Andrea Zanetti" <AZanetti@thrupoint.net>
Cc: <my-ccie-test@libero.it>; <ccielab@groupstudy.com>
Sent: Tuesday, March 01, 2005 6:00 PM
Subject: Re: ISIS Full mesh adjiacency
> That is correct p2p and broadcast only.
>
> Max, pls. check "Troubleshooting IP Routing Protocols", Shamim et. al.
> pages 536-540.
>
> "NBMA media should be configured as broadcast links only when the
> routers are fully meshed by the underlying PVC" ..."Nonfully meshed
> NBMA environments should use p2p setup..."
>
>
> On Tue, 1 Mar 2005 10:37:01 +0100, Andrea Zanetti
> <AZanetti@thrupoint.net> wrote:
> > Hi Max, as far as I know ISIS supports only broadcast or point-to-poitn
> > topologies.
> > I think, but I am not sure, that if you are working on NMBA topology you
> > could set up a full mesh of unnumbered tunnels, enabling ISIS on them.
> > Bye
> >
> > Andrea
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > my-ccie-test@libero.it
> > Sent: 26 February 2005 11:35
> > To: ccielab@groupstudy.com
> > Subject: ISIS Full mesh adjiacency
> >
> > Hi all,
> > A couple of questions about isis.
> > Does isis require full mesh adjiacency between L2 or L1 routers?
> > If I have Hub & spoke topology with L1 or L2 routers, can I make
> > adjiacency between spoke and hub routers or I must build adjiacency
> > between all routers configuring a full mesh Frame-relay PVCs?
> >
> > thanks in advance for any comments.
> >
> > Max
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > Note:The information contained in this message may be privileged and confidential and protected from disclosure . If the reader of this message is not the
> > intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
> > dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us
> > immediately by replying to the message and deleting it from your computer. Thankyou. ThruPoint Ltd.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
> --
> Kind Regards,
>
> Bajo
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:38 GMT-3