From: Dillon Yang (gzdillon@hotmail.com)
Date: Thu Mar 03 2005 - 13:34:51 GMT-3
Hi, Max:
I did a lot of combination for ISIS, I could not find a way to configure ISIS network p2p explicitly. Maybe you can?
From the output of ""debug isis adj", I just saw "xxx sending L2 LAN IIH on yyy" if its on main interface; and I saw "xxx sending L1 serial IIH" on subinterface; and I saw "xxx sending L1 IIH" somewhere.
I can not distinguish the third type for I just know two type that are "LAN IIH" and "serial IIH".
dillon
----- Original Message -----
From: <my-ccie-test@libero.it>
To: <ccielab@groupstudy.com>
Sent: Wednesday, March 02, 2005 4:36 AM
Subject: Re: Re: ISIS Full mesh adjiacency
> Thank you all for your comments.
> I think when we have isis in FR cloud topolgy AND broadcast net type (physical or p2multi interfaces)we must use fully-meshed pvcs, otherwise we have to configure p2p links or configure isis network point-to-point.
>
> do you agree on this ?
>
> bye
>
> Max
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:39 GMT-3