RE: Specifying many FA interfaces in one line in a Cat3550

From: ccie2be (ccie2be@nyc.rr.com)
Date: Sat Feb 26 2005 - 12:22:28 GMT-3

• Next message: k c: "IPv6 OSPF problem"
• Previous message: Dillon Yang: "Re: Specifying many FA interfaces in one line in a Cat3550"
• Maybe in reply to: Chris Aguillo: "Specifying many FA interfaces in one line in a Cat3550"
• Next in thread: Michael Doherty: "RE: Specifying many FA interfaces in one line in a Cat3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I'm pretty sure, not 100%, however, discontinuous interfaces can also be
listed with the interface range by uses a comma.

Using a macro is good if you have to refer back to that same list of
interfaces multiple times. But, if you don't expect to need that reference,
it's probably easier and faster to just list the interfaces in the interface
range command.

Off-hand, I can't recall if spaces are needed before or after the comma.

HTH, Tim

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Dillon Yang
Sent: Saturday, February 26, 2005 10:12 AM
To: Group Study
Subject: Re: Specifying many FA interfaces in one line in a Cat3550

Alternate method is command macro for discontiguous interface number

HTH

dillon

----- Original Message -----
From: "ccie2be" <ccie2be@nyc.rr.com>
To: "'Chris Aguillo'" <ccaguillo1@hotpop.com>; "'ccielab'"
<ccielab@groupstudy.com>
Sent: Saturday, February 26, 2005 9:03 PM
Subject: RE: Specifying many FA interfaces in one line in a Cat3550

> Use the interface range command.
>
> For example,
>
> Interface range fa0/10 - 13
>
> Note that you must have a space before and after the hyphen.
>
> HTH, Tim
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Chris Aguillo
> Sent: Saturday, February 26, 2005 7:18 AM
> To: ccielab
> Subject: Specifying many FA interfaces in one line in a Cat3550
>
> Hi Guys,
>
> I would like to ask on how to configure many interfaces of cat3550 in
> one go but specifying many interfaces to be configured.
>
> Thanks...
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: k c: "IPv6 OSPF problem"
• Previous message: Dillon Yang: "Re: Specifying many FA interfaces in one line in a Cat3550"
• Maybe in reply to: Chris Aguillo: "Specifying many FA interfaces in one line in a Cat3550"
• Next in thread: Michael Doherty: "RE: Specifying many FA interfaces in one line in a Cat3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:25 GMT-3