From: Dillon Yang (gzdillon@hotmail.com)
Date: Sat Feb 26 2005 - 12:12:13 GMT-3
Alternate method is command macro for discontiguous interface number
HTH
dillon
----- Original Message -----
From: "ccie2be" <ccie2be@nyc.rr.com>
To: "'Chris Aguillo'" <ccaguillo1@hotpop.com>; "'ccielab'" <ccielab@groupstudy.com>
Sent: Saturday, February 26, 2005 9:03 PM
Subject: RE: Specifying many FA interfaces in one line in a Cat3550
> Use the interface range command.
>
> For example,
>
> Interface range fa0/10 - 13
>
> Note that you must have a space before and after the hyphen.
>
> HTH, Tim
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Chris Aguillo
> Sent: Saturday, February 26, 2005 7:18 AM
> To: ccielab
> Subject: Specifying many FA interfaces in one line in a Cat3550
>
> Hi Guys,
>
> I would like to ask on how to configure many interfaces of cat3550 in
> one go but specifying many interfaces to be configured.
>
> Thanks...
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:25 GMT-3