From: Balaji Siva (bsivasub@gmail.com)
Date: Wed Feb 23 2005 - 22:20:10 GMT-3
You would do switchport mode access and configure access vlan and voice vlan.
SwitchB(config-if)#switchport mode access
SwitchB(config-if)#switchport access vlan 10
SwitchB(config-if)#switchport voice vlan 100
Trunk "mode" config is not necessary. Please don't comback and say
we are really doing trunk etc...I know that. but from configuration
point of view, you don't have to put the port into trunk mode.
hth
Balaji
On Wed, 23 Feb 2005 03:50:35 -0500, gladston@br.ibm.com
<gladston@br.ibm.com> wrote:
> Sorry this topic again.
> From a discussion with a studygroup, there are different points of view if a interface connected to a Cisco IPPhone should be kept in switchport mode dynamic or switchport mode trunk.
>
> One said if using switchport voice vlan vlan-id is is not necessary to trunk. I must confess I am lost after nothing getting a point from Wendell and Catalyst QoS about this.
>
> I am aware voice is over on R&S.
>
> Any post appreciated.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:25 GMT-3