Re: EIGRP K Values metric weights

From: Scott Thornton (scthornton@gmail.com)
Date: Wed Feb 23 2005 - 00:28:34 GMT-3

That's exactly what I was looking for...

so basically to eliminate bandwidth...

metric weights 0 0 0 1 1 1

Thanks.

On Tue, 22 Feb 2005 22:09:23 -0500, Brian McGahan
<bmcgahan@internetworkexpert.com> wrote:
> Scott,
>
> If you want to eliminate everything except bandwidth it would be
> "0 X 0 0 0 0 0", where X is any number. If you want to eliminate
> bandwidth and leave everything else it would be "0 0 0 X X X", where X
> is any number, as bandwidth is part of the load calculation.
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Scott Thornton
> > Sent: Tuesday, February 22, 2005 7:41 PM
> > To: Group Study
> > Subject: EIGRP K Values metric weights
> >
> > Can someone help me out with this one?
> >
> > I want to eliminate bandwidth as a characteristic EIGRP uses to
> > calculate its composite metric.
> >
> > I'm trying to figure out which values to make 0... (EIGRPmetric = {k1
> > x BW + [(k2 x BW)/(256 b load)] + k3 x delay} x {k5/(reliability +
> > k4)})
> >
> > router eigrp 1
> > metric weights 0 0 0 1 0 0
> >
> > tos k1 k2 k3 k4 k5
> >
> > I know the above configuration eliminates everything but delay. I
> > want to know if it's possible to eliminate everything but bandwidth.
> >
> > Thanks.
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> 

-- 
Scott C Thornton

Notice: This e-mail (including attachments) is covered by the Electronic
Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may be
legally privileged.  If you are not the intended recipient, you are hereby
notified that any retention, dissemination, distribution, or copying of this
communication is strictly prohibited.  Please reply to the sender that you
have received the message in error, then delete it.  Thank you.

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:24 GMT-3