From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Feb 23 2005 - 00:09:23 GMT-3
Scott,
If you want to eliminate everything except bandwidth it would be
"0 X 0 0 0 0 0", where X is any number. If you want to eliminate
bandwidth and leave everything else it would be "0 0 0 X X X", where X
is any number, as bandwidth is part of the load calculation.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Scott Thornton
> Sent: Tuesday, February 22, 2005 7:41 PM
> To: Group Study
> Subject: EIGRP K Values metric weights
>
> Can someone help me out with this one?
>
> I want to eliminate bandwidth as a characteristic EIGRP uses to
> calculate its composite metric.
>
> I'm trying to figure out which values to make 0... (EIGRPmetric = {k1
> x BW + [(k2 x BW)/(256 b load)] + k3 x delay} x {k5/(reliability +
> k4)})
>
> router eigrp 1
> metric weights 0 0 0 1 0 0
>
> tos k1 k2 k3 k4 k5
>
> I know the above configuration eliminates everything but delay. I
> want to know if it's possible to eliminate everything but bandwidth.
>
> Thanks.
>
>
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:24 GMT-3