RSH and RCMD

From: John T M (john_t_mathai@hotmail.com)
Date: Wed Feb 02 2005 - 13:16:58 GMT-3

Next message: Church, Chuck: "Requested Networkers Advanced OSPF presentation"
Previous message: Rodolphe Abou Nassar: "RE: How effective is NetMasterClass DoIT"
Next in thread: Dave Mumford: "RE: RSH and RCMD"
Maybe reply: Dave Mumford: "RE: RSH and RCMD"
Maybe reply: Dave Mumford: "RE: RSH and RCMD"
Maybe reply: John T M: "Re: RSH and RCMD"
Maybe reply: John T M: "Re: RSH and RCMD"
Maybe reply: John T M: "Re: RSH and RCMD"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I am trying the rsh for using it in TCL ping test. Somehow it is not
working. Here is what I am trying wit the two routers initially, the
loopbacks are reachable from either routers

R1(3640 with 12.3 ) ------> R2 ( 2621 with 12.3 )

R1 config has
interface lo 0
ip address 172.16.101.1 255.255.255.255
!
ip rcmd rsh-enable
ip rcmd source-interface loopback 0

R2 has
interface lo 0
ip address 172.16.105.1 255.255.255.255
!
ip rcmd rsh-enable
ip rcmd remote-host R1 172.16.101.1 R1 enable
!

When I try from R1 with command
rsh 172.16.105.1 show ip int brief

I get error %rcp protocol error.

Any clue on whats going wrong ?

Regds/John

Next message: Church, Chuck: "Requested Networkers Advanced OSPF presentation"
Previous message: Rodolphe Abou Nassar: "RE: How effective is NetMasterClass DoIT"
Next in thread: Dave Mumford: "RE: RSH and RCMD"
Maybe reply: Dave Mumford: "RE: RSH and RCMD"
Maybe reply: Dave Mumford: "RE: RSH and RCMD"
Maybe reply: John T M: "Re: RSH and RCMD"
Maybe reply: John T M: "Re: RSH and RCMD"
Maybe reply: John T M: "Re: RSH and RCMD"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:16 GMT-3